FoxFury Taker B50 Ballistic Shield Light, Law Enforcement & Military Light

Description

Description
The FoxFury Taker B50 is a retrofittable, front mounted 1000 lumen LED light for ballistic shields. This strobe-capable shield light provides tactical officers with panoramic lighting and immediate situation assessment to see and respond faster.
The Taker B50 is our most powerful aftermarket shield light. It is equipped with a single pressure switch that activates the light and changes modes. This light has dual settings: On/Off and Tactical (3 modes: Momentary, Continuous On, and disorienting Turbo-Strobe™). This tactical lighting tool has a Kill Switch feature, which allows the operator to lock out the light from unintentional activation. The Taker B50 mounts to the front of ballistic shields via industrial strength reclosable fasteners (Velcro®), which means no drilling into the shield and no compromising shield ballistics.
The lightweight B50 utilizes CREE LED technology and is powered by CR123 batteries. The ultradurable B50 is waterproof, flame resistant, and designed for use in anti-riot situations along with dynamic and deliberate entries by SWAT, military special operations, and law enforcement around the globe.
Retrofittable Design
This light and battery pack can quickly and effectively be front mounted to shields via the included industrial 3M Dual Lock Strips fasteners (or VELCRO® mounted). This allows the light to be used and removed without causing permanent changes (holes) to the shield.
Medium Beam Pattern
The wider beam angle provides panoramic lighting and immediate situation assessment so you can see and respond faster. This is helpful in close quarters (hallways and doorways).
Durability
FoxFury shield lights are fully waterproof, fire-resistant, impact-resistant and can be used in all-weather situations. They will hold up in challenging environments and can even be decontaminated if needed.
Turbo-Strobe™
A turbo-strobe option is included in this unit. This varying frequency strobe mode is used to disorient individuals when necessary.
Pressure Switch Activation
This model comes equipped with a single pressure switch, which is used to activate the light and change modes.
Kill Switch
This light comes with a kill switch feature. It allows the operator to lock out the light from unintentional activation.
Specifications
Lumens
1000 Lumens
Battery Life
5 - 8 Hours
Power Source
3x or 6x CR123 Batteries - not included
Modes
3 (Momentary, Turbo-Strobe™, Continuous On)
Weight
24 oz (680 g)
Dimensions
5.7 x 2.3 x 2.0 in (145 x 58 x 51 mm)
Certifications
CE
Ingress Protection
IPX7
Fire Resistant
Meets NFPA 1971-8.6 (2013) Requirements
Waterproof
19.7 ft (6 m)
Impact Resistant
9.8 ft (3 m)
LED Color
White
Color Temperature
5700K
Operating Temperature
-4°F (-20°C) to 300°F (149°C)
Materials
Nylon 66 protective guard and polycarbonate lens, Heavy duty steel braided cable, Nylon 66 battery pack, Black Nylon 66 protective sleeve
Beam Distance
452 ft (138 m)
Features
Single switch operation
Turbo-strobe mode
Kill switch
Two program choices: either 3 Tactical modes or On/Off
Braided steel cable
Warranty
Limited Lifetime Warranty
What's Included
Taker B50 Light, 3M Dual Lock Strips (x6)(P/N 51-042), Shield Light Cable Clips (x8)(P/N 61-041), Square Pressure Switch (P/N 35-009), Pressure Switch (P/N 35-002)